Ethernet Module

With this SPI-Ethernet interface converter, you can expand for example your Arduino or your Raspberry Pi Pico with an Ethernet interface.
The integrated W5500 chip enables simple control via the SPI interface. Due to its great popularity, both in the maker and industrial sectors, there are already a large number of application examples and libraries to be found online.
To process the Ethernet packets, the chip has an integrated 32 kB memory buffer.
In addition, the module is highly integrable due to its design and size.

Specifications

Model

RJ45 Connector module with W5500 chip and status LED

Special feature

integrated full TCP/IP protocol, Wake Up after power failure

Compatible with

Arduino, Raspberry Pi, etc.

Flash storage

32KB TX RX cache buffer

Voltage supply

3.3 V

Working current

min. 200 mA

Logic level

3.3 V (5 V tolerant)

SPI clock frequency

up to 80 MHz

Transmission rate

10/100 MBps

Ethernet standard

10 BaseT /100BaseTX

Supported TCP/IP protocols

TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE

Operating temperature

-25 to 70 °C

Additional information

Dimensions

23 x 29 x 24 mm

Items shipped

SPI to Ethernet converter

EAN

4250236822211

Article No.

SBC-USR-ES1

Recommended products

ARD R3DIP

ARD_R3DIP microcontroller (Arduino-compatible)

ESP8266

WiFi Module

NodeMCU ESP32

Microcontroller Development Board

Achtung!

Ihr Webbrowser ist veraltet. Wechseln Sie jetzt zu einem aktuellen Browser für mehr Sicherheit, Geschwindigkeit und den besten Komfort auf dieser Seite.